Access to Experience         Tools for Learning         An Appreciation of the Craft
{"id":1771953160282,"title":"How To Build The Ocean Pointer (hurt)","handle":"how-to-build-the-ocean-pointer-hurt","description":"\u003cp\u003e\u003cspan style=\"color: blue;\" color=\"blue\"\u003eTake advantage of the lower prices of these \"hurt\" books. These books have been returned, are slightly bunged or scuffed. None of these books are severely damaged, ie; ripped pages, water stained, and the like. They are perfectly readable, useable books. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: blue;\" color=\"blue\"\u003ePlease note: hurt books are sold as non-returnable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan style=\"color: blue;\" color=\"blue\"\u003e \u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBased on the Alton Wallace 18' round-bilged outboard skiff known as the West Pointer, the Ocean Pointer is a bit larger, and a significantly drier boat with a sweeping sheer, able to accommodate a 25-75 hp outboard. \u003cbr\u003e\u003cbr\u003eDesigner\/builder David Stimson created this boat to be strip-built (narrow pieces of wood), which is an especially forgiving building method for the less experienced builder.\u003c\/p\u003e\n\u003cp\u003eThis new book provides step-by-step instructions on the building process so the reader will easily be able to determine if this is their ideal craft, and if so inclined, have at it. She'll move nicely through the water, and between that sheer and the aft tumblehome, she has a shape you'll never tire of.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eContents\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cli\u003eIntroduction:From West Pointer to Ocean PointerOcean Pointer?s design and construction\n\u003cp\u003e\u003cb\u003eChapter I\u003c\/b\u003e Design and Performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo vee or not to vee: A question of flat bottom vs. deadrise\u003c\/li\u003e\n\u003cli\u003eOcean Pointer?s hull lines, and how they affect performance\n\u003cp\u003e\u003cb\u003eChapter II\u003c\/b\u003e Getting Started\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eSetting up your shop\u003c\/li\u003e\n\u003cli\u003eSafe use of power tools\u003c\/li\u003e\n\u003cli\u003eSafe handling of epoxy\u003c\/li\u003e\n\u003cli\u003eTips for successful gluing\u003c\/li\u003e\n\u003cli\u003eConstruction overview\u003c\/li\u003e\n\u003cli\u003eMaterials and supplies\n\u003cp\u003e\u003cb\u003eChapter III\u003c\/b\u003e Making Molds and Patterns\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eMaking the cockpit molds\u003c\/li\u003e\n\u003cli\u003ePatternmaking\n\u003cp\u003e\u003cb\u003eChapter IV\u003c\/b\u003e The Backbone: Keel, Stem, and Transom\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eInner and outer keel\u003c\/li\u003e\n\u003cli\u003eThe inner stem\u003c\/li\u003e\n\u003cli\u003eThe outer stem\u003c\/li\u003e\n\u003cli\u003eThe forefoot\u003c\/li\u003e\n\u003cli\u003eThe transom\n\u003cp\u003e\u003cb\u003eChapter V\u003c\/b\u003e Making the Bulkhead Frames and Setting Up\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eBulkhead frames and motorwell sides\u003c\/li\u003e\n\u003cli\u003eThe cockpit sole\u003c\/li\u003e\n\u003cli\u003eThe ceiling\u003c\/li\u003e\n\u003cli\u003eSetting up the molds\u003c\/li\u003e\n\u003cli\u003eMarking the stations and setting up the cockpit molds\u003c\/li\u003e\n\u003cli\u003eInstalling the motorwell sides and bracing the molds\u003c\/li\u003e\n\u003cli\u003eInstalling the cockpit sole and transom\u003c\/li\u003e\n\u003cli\u003eInstalling the ceiling\u003c\/li\u003e\n\u003cli\u003eInstalling the bulkhead frames\u003c\/li\u003e\n\u003cli\u003eInstalling the inner keel\u003c\/li\u003e\n\u003cli\u003eInstalling the stem\u003c\/li\u003e\n\u003cli\u003eApplying epoxy fillets\u003c\/li\u003e\n\u003cli\u003eInstalling the outer keel\u003c\/li\u003e\n\u003cli\u003eBeveling the bulkhead frames\u003c\/li\u003e\n\u003cli\u003eBeveling the forward end of the inner keel\u003c\/li\u003e\n\u003cli\u003eBeveling the transom\u003c\/li\u003e\n\u003cli\u003eSealing the plywood\u003c\/li\u003e\n\u003cli\u003eInstalling the control cable and wiring conduits\u003c\/li\u003e\n\u003cli\u003eInstalling the Styrofoam flotation\n\u003cp\u003e\u003cb\u003eChapter VI\u003c\/b\u003e Planking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eRemoving the temporary fastenings\u003c\/li\u003e\n\u003cli\u003ePreparing the plank strips\u003c\/li\u003e\n\u003cli\u003ePlanking the hull\u003c\/li\u003e\n\u003cli\u003eApplying the fillets\u003c\/li\u003e\n\u003cli\u003eCutting off the planking parallel to the sheer\n\u003cp\u003e\u003cb\u003eChapter VII\u003c\/b\u003e Completing the Exterior\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eFairing the hull\u003c\/li\u003e\n\u003cli\u003eInstalling the outer stem and forefoot\u003c\/li\u003e\n\u003cli\u003eFlipping the boat\n\u003cp\u003e\u003cb\u003eChapter VIII\u003c\/b\u003e Preparing for Decking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003ePlaning the sheer\u003c\/li\u003e\n\u003cli\u003eFitting and fastening the inner rubrails\u003c\/li\u003e\n\u003cli\u003eDynel cockpit sheathing\u003c\/li\u003e\n\u003cli\u003eThe deck framing\n\u003cp\u003e\u003cb\u003eChapter IX\u003c\/b\u003e Laying the Deck\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eMarking and cutting out the deck panels\u003c\/li\u003e\n\u003cli\u003eInstalling the deck panels\u003c\/li\u003e\n\u003cli\u003eSheathing the deck with Dynel\n\u003cp\u003e\u003cb\u003eChapter X\u003c\/b\u003e Completing the Woodwork\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eBuilding the center console and seat box\u003c\/li\u003e\n\u003cli\u003eBuilding the forward seat\u003c\/li\u003e\n\u003cli\u003eMaking the coamings\u003c\/li\u003e\n\u003cli\u003eThe outer rubrails\u003c\/li\u003e\n\u003cli\u003eStriking the waterline\n\u003cp\u003e\u003cb\u003eChapter XI\u003c\/b\u003e Controls, Deck Hardware, and Finishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eMounting the hardware\u003c\/li\u003e\n\u003cli\u003eThe helm\u003c\/li\u003e\n\u003cli\u003eThe control lever\u003c\/li\u003e\n\u003cli\u003eThe control cables\u003c\/li\u003e\n\u003cli\u003eThe splashwell mounting kit\u003c\/li\u003e\n\u003cli\u003eScupper drains\u003c\/li\u003e\n\u003cli\u003eRunning lights\u003c\/li\u003e\n\u003cli\u003eVentilators\u003c\/li\u003e\n\u003cli\u003eBow chocks\u003c\/li\u003e\n\u003cli\u003ePanel and battery switch\u003c\/li\u003e\n\u003cli\u003eIgnition switch\u003c\/li\u003e\n\u003cli\u003eMooring and stern cleats\u003c\/li\u003e\n\u003cli\u003eFire extinguisher\u003c\/li\u003e\n\u003cli\u003eInstalling the console\u003c\/li\u003e\n\u003cli\u003eInstalling the seat box\u003c\/li\u003e\n\u003cli\u003eThe battery box\u003c\/li\u003e\n\u003cli\u003eThe fuel tanks\u003c\/li\u003e\n\u003cli\u003eChoosing a motor\u003c\/li\u003e\n\u003cli\u003ePainting and varnishing\u003c\/li\u003e\n\u003cli\u003eFinishing touches\n\u003cp\u003e\u003cb\u003eAppendix I\u003c\/b\u003e Sources for Materials\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAppendix II\u003c\/b\u003e Repairs and Maintenance\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e(Full-sized patterns\/offsets not included with the book)\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e","published_at":"2019-04-20T14:11:08-04:00","created_at":"2019-04-20T14:11:09-04:00","vendor":"WoodenBoat Publications Inc.","type":"WoodenBoat Books 1310 1310Hurt","tags":[],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":1795,"compare_at_price_min":1795,"compare_at_price_max":1795,"compare_at_price_varies":false,"variants":[{"id":16904414265434,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"325-125S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"How To Build The Ocean Pointer (hurt)","public_title":null,"options":["Default Title"],"price":1200,"weight":454,"compare_at_price":1795,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0053\/4098\/7482\/products\/325125_OceanPointer_200_4c4c1fe3-026f-42d4-950a-b16ff8ee1b84.jpg?v=1555939465"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/4098\/7482\/products\/325125_OceanPointer_200_4c4c1fe3-026f-42d4-950a-b16ff8ee1b84.jpg?v=1555939465","options":["Title"],"content":"\u003cp\u003e\u003cspan style=\"color: blue;\" color=\"blue\"\u003eTake advantage of the lower prices of these \"hurt\" books. These books have been returned, are slightly bunged or scuffed. None of these books are severely damaged, ie; ripped pages, water stained, and the like. They are perfectly readable, useable books. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: blue;\" color=\"blue\"\u003ePlease note: hurt books are sold as non-returnable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan style=\"color: blue;\" color=\"blue\"\u003e \u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBased on the Alton Wallace 18' round-bilged outboard skiff known as the West Pointer, the Ocean Pointer is a bit larger, and a significantly drier boat with a sweeping sheer, able to accommodate a 25-75 hp outboard. \u003cbr\u003e\u003cbr\u003eDesigner\/builder David Stimson created this boat to be strip-built (narrow pieces of wood), which is an especially forgiving building method for the less experienced builder.\u003c\/p\u003e\n\u003cp\u003eThis new book provides step-by-step instructions on the building process so the reader will easily be able to determine if this is their ideal craft, and if so inclined, have at it. She'll move nicely through the water, and between that sheer and the aft tumblehome, she has a shape you'll never tire of.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eContents\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cli\u003eIntroduction:From West Pointer to Ocean PointerOcean Pointer?s design and construction\n\u003cp\u003e\u003cb\u003eChapter I\u003c\/b\u003e Design and Performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo vee or not to vee: A question of flat bottom vs. deadrise\u003c\/li\u003e\n\u003cli\u003eOcean Pointer?s hull lines, and how they affect performance\n\u003cp\u003e\u003cb\u003eChapter II\u003c\/b\u003e Getting Started\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eSetting up your shop\u003c\/li\u003e\n\u003cli\u003eSafe use of power tools\u003c\/li\u003e\n\u003cli\u003eSafe handling of epoxy\u003c\/li\u003e\n\u003cli\u003eTips for successful gluing\u003c\/li\u003e\n\u003cli\u003eConstruction overview\u003c\/li\u003e\n\u003cli\u003eMaterials and supplies\n\u003cp\u003e\u003cb\u003eChapter III\u003c\/b\u003e Making Molds and Patterns\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eMaking the cockpit molds\u003c\/li\u003e\n\u003cli\u003ePatternmaking\n\u003cp\u003e\u003cb\u003eChapter IV\u003c\/b\u003e The Backbone: Keel, Stem, and Transom\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eInner and outer keel\u003c\/li\u003e\n\u003cli\u003eThe inner stem\u003c\/li\u003e\n\u003cli\u003eThe outer stem\u003c\/li\u003e\n\u003cli\u003eThe forefoot\u003c\/li\u003e\n\u003cli\u003eThe transom\n\u003cp\u003e\u003cb\u003eChapter V\u003c\/b\u003e Making the Bulkhead Frames and Setting Up\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eBulkhead frames and motorwell sides\u003c\/li\u003e\n\u003cli\u003eThe cockpit sole\u003c\/li\u003e\n\u003cli\u003eThe ceiling\u003c\/li\u003e\n\u003cli\u003eSetting up the molds\u003c\/li\u003e\n\u003cli\u003eMarking the stations and setting up the cockpit molds\u003c\/li\u003e\n\u003cli\u003eInstalling the motorwell sides and bracing the molds\u003c\/li\u003e\n\u003cli\u003eInstalling the cockpit sole and transom\u003c\/li\u003e\n\u003cli\u003eInstalling the ceiling\u003c\/li\u003e\n\u003cli\u003eInstalling the bulkhead frames\u003c\/li\u003e\n\u003cli\u003eInstalling the inner keel\u003c\/li\u003e\n\u003cli\u003eInstalling the stem\u003c\/li\u003e\n\u003cli\u003eApplying epoxy fillets\u003c\/li\u003e\n\u003cli\u003eInstalling the outer keel\u003c\/li\u003e\n\u003cli\u003eBeveling the bulkhead frames\u003c\/li\u003e\n\u003cli\u003eBeveling the forward end of the inner keel\u003c\/li\u003e\n\u003cli\u003eBeveling the transom\u003c\/li\u003e\n\u003cli\u003eSealing the plywood\u003c\/li\u003e\n\u003cli\u003eInstalling the control cable and wiring conduits\u003c\/li\u003e\n\u003cli\u003eInstalling the Styrofoam flotation\n\u003cp\u003e\u003cb\u003eChapter VI\u003c\/b\u003e Planking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eRemoving the temporary fastenings\u003c\/li\u003e\n\u003cli\u003ePreparing the plank strips\u003c\/li\u003e\n\u003cli\u003ePlanking the hull\u003c\/li\u003e\n\u003cli\u003eApplying the fillets\u003c\/li\u003e\n\u003cli\u003eCutting off the planking parallel to the sheer\n\u003cp\u003e\u003cb\u003eChapter VII\u003c\/b\u003e Completing the Exterior\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eFairing the hull\u003c\/li\u003e\n\u003cli\u003eInstalling the outer stem and forefoot\u003c\/li\u003e\n\u003cli\u003eFlipping the boat\n\u003cp\u003e\u003cb\u003eChapter VIII\u003c\/b\u003e Preparing for Decking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003ePlaning the sheer\u003c\/li\u003e\n\u003cli\u003eFitting and fastening the inner rubrails\u003c\/li\u003e\n\u003cli\u003eDynel cockpit sheathing\u003c\/li\u003e\n\u003cli\u003eThe deck framing\n\u003cp\u003e\u003cb\u003eChapter IX\u003c\/b\u003e Laying the Deck\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eMarking and cutting out the deck panels\u003c\/li\u003e\n\u003cli\u003eInstalling the deck panels\u003c\/li\u003e\n\u003cli\u003eSheathing the deck with Dynel\n\u003cp\u003e\u003cb\u003eChapter X\u003c\/b\u003e Completing the Woodwork\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eBuilding the center console and seat box\u003c\/li\u003e\n\u003cli\u003eBuilding the forward seat\u003c\/li\u003e\n\u003cli\u003eMaking the coamings\u003c\/li\u003e\n\u003cli\u003eThe outer rubrails\u003c\/li\u003e\n\u003cli\u003eStriking the waterline\n\u003cp\u003e\u003cb\u003eChapter XI\u003c\/b\u003e Controls, Deck Hardware, and Finishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials\u003c\/li\u003e\n\u003cli\u003eMounting the hardware\u003c\/li\u003e\n\u003cli\u003eThe helm\u003c\/li\u003e\n\u003cli\u003eThe control lever\u003c\/li\u003e\n\u003cli\u003eThe control cables\u003c\/li\u003e\n\u003cli\u003eThe splashwell mounting kit\u003c\/li\u003e\n\u003cli\u003eScupper drains\u003c\/li\u003e\n\u003cli\u003eRunning lights\u003c\/li\u003e\n\u003cli\u003eVentilators\u003c\/li\u003e\n\u003cli\u003eBow chocks\u003c\/li\u003e\n\u003cli\u003ePanel and battery switch\u003c\/li\u003e\n\u003cli\u003eIgnition switch\u003c\/li\u003e\n\u003cli\u003eMooring and stern cleats\u003c\/li\u003e\n\u003cli\u003eFire extinguisher\u003c\/li\u003e\n\u003cli\u003eInstalling the console\u003c\/li\u003e\n\u003cli\u003eInstalling the seat box\u003c\/li\u003e\n\u003cli\u003eThe battery box\u003c\/li\u003e\n\u003cli\u003eThe fuel tanks\u003c\/li\u003e\n\u003cli\u003eChoosing a motor\u003c\/li\u003e\n\u003cli\u003ePainting and varnishing\u003c\/li\u003e\n\u003cli\u003eFinishing touches\n\u003cp\u003e\u003cb\u003eAppendix I\u003c\/b\u003e Sources for Materials\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAppendix II\u003c\/b\u003e Repairs and Maintenance\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e(Full-sized patterns\/offsets not included with the book)\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e"}

How To Build The Ocean Pointer (hurt)

Product Description
$12.00 $17.95
Maximum quantity available reached.

Take advantage of the lower prices of these "hurt" books. These books have been returned, are slightly bunged or scuffed. None of these books are severely damaged, ie; ripped pages, water stained, and the like. They are perfectly readable, useable books.

Please note: hurt books are sold as non-returnable.

 

Based on the Alton Wallace 18' round-bilged outboard skiff known as the West Pointer, the Ocean Pointer is a bit larger, and a significantly drier boat with a sweeping sheer, able to accommodate a 25-75 hp outboard.

Designer/builder David Stimson created this boat to be strip-built (narrow pieces of wood), which is an especially forgiving building method for the less experienced builder.

This new book provides step-by-step instructions on the building process so the reader will easily be able to determine if this is their ideal craft, and if so inclined, have at it. She'll move nicely through the water, and between that sheer and the aft tumblehome, she has a shape you'll never tire of.

Contents

 

  • Introduction:From West Pointer to Ocean PointerOcean Pointer?s design and construction

    Chapter I Design and Performance

  • To vee or not to vee: A question of flat bottom vs. deadrise
  • Ocean Pointer?s hull lines, and how they affect performance

    Chapter II Getting Started

  • Setting up your shop
  • Safe use of power tools
  • Safe handling of epoxy
  • Tips for successful gluing
  • Construction overview
  • Materials and supplies

    Chapter III Making Molds and Patterns

  • Materials
  • Making the cockpit molds
  • Patternmaking

    Chapter IV The Backbone: Keel, Stem, and Transom

  • Materials
  • Inner and outer keel
  • The inner stem
  • The outer stem
  • The forefoot
  • The transom

    Chapter V Making the Bulkhead Frames and Setting Up

  • Materials
  • Bulkhead frames and motorwell sides
  • The cockpit sole
  • The ceiling
  • Setting up the molds
  • Marking the stations and setting up the cockpit molds
  • Installing the motorwell sides and bracing the molds
  • Installing the cockpit sole and transom
  • Installing the ceiling
  • Installing the bulkhead frames
  • Installing the inner keel
  • Installing the stem
  • Applying epoxy fillets
  • Installing the outer keel
  • Beveling the bulkhead frames
  • Beveling the forward end of the inner keel
  • Beveling the transom
  • Sealing the plywood
  • Installing the control cable and wiring conduits
  • Installing the Styrofoam flotation

    Chapter VI Planking

  • Materials
  • Removing the temporary fastenings
  • Preparing the plank strips
  • Planking the hull
  • Applying the fillets
  • Cutting off the planking parallel to the sheer

    Chapter VII Completing the Exterior

  • Materials
  • Fairing the hull
  • Installing the outer stem and forefoot
  • Flipping the boat

    Chapter VIII Preparing for Decking

  • Materials
  • Planing the sheer
  • Fitting and fastening the inner rubrails
  • Dynel cockpit sheathing
  • The deck framing

    Chapter IX Laying the Deck

  • Materials
  • Marking and cutting out the deck panels
  • Installing the deck panels
  • Sheathing the deck with Dynel

    Chapter X Completing the Woodwork

  • Materials
  • Building the center console and seat box
  • Building the forward seat
  • Making the coamings
  • The outer rubrails
  • Striking the waterline

    Chapter XI Controls, Deck Hardware, and Finishing

  • Materials
  • Mounting the hardware
  • The helm
  • The control lever
  • The control cables
  • The splashwell mounting kit
  • Scupper drains
  • Running lights
  • Ventilators
  • Bow chocks
  • Panel and battery switch
  • Ignition switch
  • Mooring and stern cleats
  • Fire extinguisher
  • Installing the console
  • Installing the seat box
  • The battery box
  • The fuel tanks
  • Choosing a motor
  • Painting and varnishing
  • Finishing touches

    Appendix I Sources for Materials

    Appendix II Repairs and Maintenance

    (Full-sized patterns/offsets not included with the book)

  • Sku: 325-125S
    x