Shellback Sailing Kit

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame--the “foundation” of the boat---is included with the kit. It’s pre-slotted, and so slick it goes together in about 5 minutes. Nice and rigid, it even includes the molds. Epoxy is also included.

You get all the parts needed, spars cut to 4 sides, all fastenings, rudder hardware, oarlocks and sockets, plans, instructions, and rigging line & hardware. Wood is Sapele, which is the highest grade marine mahogany ply available.

Also included with your kit:
"How to" book How to Build the Shellback Dinghy
Rudder Mounting Hardware
Belaying Pin
5 sheets of plans

LOA - 11' 2"
Beam - 4' 5"
Draft (db up) - 6 1/2"
(db down) - 2' 3"
Weight - about 100 lbs.
Sail Area - 54 sq. ft.
Skill level: Basic to Intermediate
Intended capacity: 1-3

Kit contains 3 boxes:
Box 1 is 98"x30"x2" and about 90lbs
Box 2 is 98"x30"x2" and about 80lbs
Box 3 is 12' x10"x10" and about 145lbs

Designed by Joel White, both designs are well-proven for rowing, towing, and sailing.

Shipping (continental US only) will add between $250 and $425 to your order, depending on the destination for the kit. Please note: you may see 2-day or next-day shipping when you check out, but that is bogus. Kits ship in 3 to 5 weeks.

We WILL ship plans, books, and some hardware which is in-stock now, and sail if you've ordered it. That will be approximately $12 to $30 for shipping, depending on destination.

No Post Office Boxes.

Not Included:
paint / varnish
oars