9'6 Nutshell Pram-Rowing Kit

Our pre-cut kits have been re-tooled (cut by computer-guided routers) to provide you with extremely accurate parts. And, the kits now come with just about everything needed except the elbow grease.

The ladder frame--the “foundation” of the boat---is now included with the kit. It’s pre-slotted, and so slick it goes together in 5 minutes. Nice and rigid, it even includes the molds. Epoxy is also now included.

You get all the parts needed, oarlocks and sockets, plans, instructions and hardware. Wood is Sapele, which is the highest grade marine mahogany ply available.

Also included with your kit:
"How to" book Building the Nutshell Pram
5 sheets of plans

LOA - 9' 6"
LWL - 7' 10"
Beam - 4' 4"
Draft (cb up) - 5"
(cb down) - 1' 11"
Weight about 100 lbs.
No lofting required
Skill level: Basic
Intended capacity: 3-4

Kit contains 3 boxes:
Box 1 is 98"x 30"x 2" and about 90lbs
Box 2 is 98"x 30"x 2" and about 80lbs
Box 3 is 12'x 10" x 10" and about 110lbs

Designed by Joel White, both designs are well-proven for rowing, towing, and sailing.

Shipping (continental US only) will add between $250 and $425 to your order, depending on the destination for the kit. Please note: you may see 2-day or next-day shipping when you check out, but that is bogus. Kits ship in 3 to 5 weeks.

We WILL ship the plans and book, and a sail if you ordered it. That will be approximately $10 to $30 shipping, depending on destination.

No Post Office Boxes.

Not Included:
paint / varnish
oars