7'7 Nutshell Pram-Sailing Kit

Our pre-cut kits have been re-tooled (cut by computer-guided routers) to provide you with extremely accurate parts. And, the kits now come with just about everything needed except the elbow grease.

The ladder frame--the “foundation” of the boat---is now included with the kit. It’s pre-slotted, and so slick it goes together in 5 minutes. Nice and rigid, it even includes the molds. Epoxy is also now included.

You get all the parts needed, spars shaped to 8 sides, all fastenings, rudder hardware, oarlocks and sockets, plans, instructions, and rigging line & hardware. Wood is Sapele, which is the highest grade marine mahogany ply available.

Also included with your kit:
"How to" book Building the Nutshell Pram
Rudder Mounting Hardware
Belaying Pin
8 sheets of plans

LOA - 7' 7"
Beam - 4'
Draft (cb up) - 5"
(cb down) - 1' 9"
Weight about 90 lbs.
Sail Area : 37 sq. ft.
No lofting required
Skill level: Basic Intended capacity: 1-2

Kit contains 3 boxes:
Box 1 is 98"x 30"x 2" and about 90lbs
Box 2 is 98"x 30"x 2" and about 80lbs
Box 3 is 12'x 10" x 10" and about 145lbs

Designed by Joel White, both designs are well-proven for rowing, towing, and sailing.

Shipping (continental US only) will add between $250 and $425 to your order, depending on the destination for the kit. Please note: you may see 2-day or next-day shipping when you check out, but that is bogus. Kits ship in 3 to 5 weeks.

We WILL ship plans, books, and some hardware which is in-stock now, and sail if you've ordered it. That will be approximately $12 to $30 for shipping, depending on destination.

No Post Office Boxes.

Not Included:
paint / varnish
oars