|
Hattie is a working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century.
This kit includes the plans and wood needed to build a basswood half hull of Hattie. The model is 15" long and built using the lift method.
Suggested Tools:
If you start with wood pre-planed to thickness, then:
scissors, pencil, coping saw, combo square, hammer, spokeshave, block plane, wood rasp, chisels... 1/2" to 1-1/2", gouge, screwdriver, c-clamps (about a dozen would be handy).
Carpenter's wood glue, sandpaper, shellac/varnish/tung oil--whatever you're going to finish with.
You will recieve 2 pages of plans that include full-sized lift patterns as well as step-by-step instructions and historical information about the boat.
|
Facebook